Push Control

Pneumatic buttons that control chromatherapy, ozone sterilization, and the air and hydro massages. The electrical switch is activated by ON/OFF AIR push control switch both are connected with clear air pipe. Make sure there is a clicking sound when push control is used. Clicking sound is coming from the electrical switch when air pushes connector in ON or OFF position.

For technical support, sales or to order a part call toll free 1-800-480-6850 or complete the contact form on the Contact us page to leave a message. The submitted message will be forwarded to one of appropriate Ella’s Bubbles team members and you will be contacted within 24 hours.

Categories: Parts, Walk In Tubs

Description

HOW TO DISASSEMBLE A PUSH CONTROL BUTTON (WHEN IT’S STUCK DOWN)

Step 1A: Begin the Release
Using a flat head / screwdriver, begin to release the flange. Be gentle with approach to not damage the plastic washer just below.

Step 1B: Repeat process
Using an additional flathead screwdriver begin to “pop off” the release button completely around the base of the button

Step 1C: Continue Releasing
Repeat this process. The button will begin to release.

Step 2A: Removal of Unit…Be Careful
Once the button is loose, it will spring up.

Step 2B: Released Push Button
The assembly comes apart with internal spring.

Step 3: Clean Out Debris
Typically a button will stick due to residue or foreign materials within the spring chamber. Clean with household cleaning solution.

Step 3a: Lubricate Button

Step 4A: Insert the Core Unit Into Place
At this point, you will want to lubricate the unit with ordinary lubricant.

Step 4B: Reassemble the Flange

Step 5A: Push Down

Step 5B: Using Two Thumbs/Fingers
Push down on the outer flange until you hear it snap into place. The Push Control Button is now ready for use.

This is the recommended lubricant